Solarix Nenergy 12v 100ah Lifepo4 Single Battery Module

Description

Why Choose the Solarix Nenergy 12 V 100 Ah LiFePO₄ Battery?

The Solarix Nenergy 12 V 100 Ah LiFePO₄ Single Battery Module is a drop-in replacement for traditional lead-acid, AGM or gel batteries, delivering more usable energy, zero maintenance and a lifespan of over a decade. Its slim wall-mount chassis saves floor space while the integrated battery management system (BMS) guards against over-charge, over-discharge and temperature extremes.

Key Benefits

• 1.28 kWh usable energy from only 9.5 kg—70 % lighter than equivalent lead-acid
• ≥2 000 cycles at 80 % depth of discharge; up to 1 000 cycles at 100 % DOD
• Compatible with 12 V hybrid inverters up to 2 kVA—perfect for small solar kits, load-shedding back-up or office UPS
• Maintenance-free prismatic LiFePO₄ cells offer stable voltage and low self-discharge
• Built-in protection for voltage, current and temperature gives you true plug-and-play convenience

Built for Safety & Longevity

Unlike cobalt-based lithium packs, LiFePO₄ chemistry is thermally stable and non-toxic. An electronic circuit breaker plus software-based current limiting prevents damage to both the battery and connected equipment. The 11.6 V–14.6 V working range ensures broad inverter compatibility while the 50 A continuous discharge rating easily handles peak loads from routers, TVs, LED lighting or small fridges.

Installation Flexibility

Measuring just 330 mm × 173 mm × 215 mm, the IP20 enclosure mounts vertically on any sturdy wall, keeping floors clear and cabling tidy. Use a single module for 1.28 kWh or parallel up to four units for 5.1 kWh of expansion without special cables or combiner boxes.

Real-World Performance

At 25 °C the battery sustains 50 A (640 W) continuous discharge and re-charges at 20 A (256 W) for rapid recovery during short solar windows. Coulombic efficiency exceeds 96 %, meaning almost every amp you put in is available for use—something lead-acid simply cannot match.

Environmental Impact

LiFePO₄ cells are 100 % recyclable and contain no heavy metals. By switching one 100 Ah AGM battery (≈30 kg) to this 9.5 kg lithium module you reduce raw material use by 68 % and CO₂ footprint by up to 70 % over the product life.

Important Note

This energy-storage battery is not intended for engine cranking or other extreme high-current applications. Always follow the manufacturer’s charge and wiring guidelines.

What’s in the Box?

• 1× Solarix Nenergy 12 V 100 Ah LiFePO₄ battery module
• 2× M8 terminal bolts & washers
• 1× Wall-mount bracket set with screws
• 1× Quick-start safety sheet

Additional information