Solarix Full Automatic Intelligent Battery Charger

Description

Why the Solarix Intelligent Battery Charger Belongs in Your Garage

Few things kill the vibe faster than a flat battery. The Solarix Full Automatic Intelligent Battery Charger rescues 12 V and 24 V lead-acid, AGM, VLR and 12.6 V lithium batteries with zero guess-work. Plug it in, let the micro-processor identify chemistry and state of health, then watch the large back-lit LCD report voltage, current, capacity and charging stage in real time. From weekend cruisers and daily drivers to jet-skis and solar banks, this yellow powerhouse keeps every power source in peak condition.

Smart Charging That Thinks for Itself

• Auto 12 V/24 V detection plus dedicated lithium 12.6 V mode
• 9-stage charging curve (soft start, bulk, absorption, analysis, recondition, float, pulse repair, maintain) maximises capacity and service life
• High & low frequency pulse repair breaks down sulphation, reviving tired batteries other chargers write off
• Manual mode puts seasoned users in full control

Built-in Armour for Your Battery and Vehicle

Forget sparks, reverse polarity drama or thermal run-away. The charger’s multi-layer protection covers:

• Reverse polarity & spark suppression
• Over-charge, over-current, over-voltage
• Open-circuit, short-circuit and overheating
• IP65 dust & moisture resistance for workshop life

Cool, Quiet, Continuous Power

An internal 180 W temperature-controlled fan only spins as fast as needed, keeping the unit below 50 °C even in summer workshops. The result: stable 10 A on 12 V and 7 A on 24 V without thermal throttling.

LCD Display That Talks Back

Clear icons show charging stage, battery type, error codes and winter/summer mode at a glance. No cryptic blinking LEDs—just plain language so beginners and pros alike know exactly what’s happening.

Compact Yet Ready for Heavy-Duty Work

Weighing only 0.7 kg and smaller than a paperback, the charger slips into a saddlebag or glove-box. Yet its 180 W transformer and rugged yellow ABS casing survive drops, oil mist and UV exposure season after season.

How to Use the Solarix Battery Charger

1. Connect red clamp to positive (+), black to negative (-)
2. Plug into 110-250 V mains—charger self-checks and wakes up
3. Select battery type or leave in AUTO for full automation
4. Charger analyses, then begins optimal charge cycle
5. When “FULL” appears, leave connected for maintenance float or disconnect and drive away

Who Needs This Charger?

• Car owners who hate winter no-starts
• Motorcycle enthusiasts with seasonal storage
• Boat and RV owners wanting shore-power maintenance
• Solar battery banks requiring periodic desulphation
• Workshops looking for one versatile, safe unit

What’s in the Retail Box?

• 1× Solarix MF-2B intelligent charger (yellow)
• 1× set heavy-duty insulated clamps (45 cm)
• 1× eyelet terminal harness for permanent installation
• 1× user manual (EN, FR, ES, DE, ZA)
• 1× 12-month warranty card

Pro Tips for Maximum Battery Life

Charge batteries before they drop below 50 % capacity. Recondition mode is most effective on batteries that still hold at least 8 V. For long-term storage, leave the charger in maintenance mode—it draws <0.5 W and keeps chemistry stable for months.

Frequently Asked Questions

Can it revive a completely dead battery?

No. If voltage is below 1 V the battery has a shorted cell and must be replaced. The charger will refuse the cycle and display “F03” to protect your vehicle.

Is it safe for start-stop AGM batteries?

Yes. Select AGM mode for enhanced absorption and float voltages that match manufacturer specs.

Will it over-charge if left connected?

No. Float and pulse maintenance keep voltage at a safe 13.6 V (12 V mode) indefinitely.

Additional information